|
SNR 4x4 Parts
Welcome to the Soixante Neuf Racing (SNR4x4) page.
SNR specialises in heavy duty 4WD parts for Toyota Hilux builds.
If you have a 4WD Hilux, you have come to the right place...
To access the full SNR website, click here: www.snr4x4.co.nz
Products Available
We import and manufacture a wide range of Hilux 4WD parts, but here is a small selection. For the full list just go to our website.
Hi Steer Arms
Billet CNC machined Hi Steer Arms for solid axle Toyota Hilux's. SNR arms are built tough from P20 mold making steel. (Heat treated to 1100Mpa, similar to 4340 in its heat treated state, then machined).
Being a bolt on operation to your steering knuckles allows all standard 12mm studs and cone washers to be used when doing the conversion. These arms have been designed to use the larger FJ-80 series Landcruiser ball joints which provide a 23mm thread, in conjunction with our heavy duty tie-rods, will give the strongest steering system available.
SNR Hi Steer arms will allow you to have both your drag link and tie rod above the springs, this means for less damage to your links when on the rocks.
For those of you that run a solid axle Hilux, this is the ultimate conversion for gaining extra travel out of your front end. The fitting of a IFS steering box is needed to give your truck the ability to steer and flex at what ever angle you desire
Hi Steer Kit
The SNR Hi Steer kit includes the following:
1 x Pair of SNR Hi Steer Arms
1 x 36mm Heavy Duty Tie-rod
1 x 36mm Heavy Duty Draglink
3 x FJ-80 Landcruiser Tie-rod Ends
4 x Jam nuts
1 x IFS Pitman Arm to Tie-rod Adapter
|
